Decorate Your Outdoor Space With This Beautiful Flower Pot

Back



Pots can be used as gifts or decorations for your home. Fill it with a cute handmade flower or you could even fill these little pots with candies and hand them out as party favours.  This is a great project for those who are interested in experimenting and learning about the art of mosaic. 

NOTE:  If you are using these mosaic flower pots to plant real flowers, make sure that there is a drainage hole in the pot you use.

Materials:

  • Terra cotta flower pot, 3 inches high and with a diameter of 3 inches at the top.
  • Mosaic tiles.
  • Safety glasses.
  • Grout.
  • Craft glue.
  • Mosaic tile cutter.
  • Small sponge.
  • A few sheets of old newspapers to protect the working area.
  • Small plastic container and spoon.
  • Suitable pot plant.
  • Electric drill (optional)

Instructions:

  • If the ceramic pot does not have a hole in the bottom, which is crucial for drainage, drill a hole in the bottom of the pot with the electric drill.
  • Use the tile cutter to cut the mosaic tiles into small triangular shapes. When doing mosaic, the tiles should all be cut to more or less the same size.
  • Glue the tiles to the side of the pot one at a time. You only need enough glue to hold the tile in place, so use a small drop of glue to secure each tile. First glue a row of cut tiles to the top of the pot, then to the bottom, leaving a space of 0.1” from the bottom of the pot when gluing the tiles in place. Then, fill in the rest of the pot’s side with the tiles.
  • Allow the glue to dry thoroughly before proceeding with the next step in hot weather, it is usually best to wait approximately an hour to allow the glue to dry thoroughly. When the glue is completely dry, you will not be able to move the tiles any more.
  • Now it is time to grout for small projects, it is advisable not to prepare all the grout at once. Add a few heaped spoonfuls to an old, small plastic container and then add a few drops of cold water until the grout is the right consistence. The grout should not be runny.
  • Use your finger to spread the grout over the side of the pot. Gently press the grout in between all the tiles, carefully ensuring not to leave any air pockets below the grout. Do not add grout to the bottom of the pot.
  • Use your finger to gently wipe away any grout from the tiles and then allow the pot to stand for 10 – 15 minutes, so that the grout can dry.
  • Use a damp sponge to gently wipe away any excess grout from your surface, rinsing the sponge constantly. The sponge must only be damp, not wet.
  • Fill the pot with soil and plant. As an option, add decorative pebbles to the pot once the plant has been added.

Images are representational only

Source: https://www.favecrafts.com
Image courtesy: shutterstock.com